RXSOL Mineralite Wash is a fast-acting, inhibited mineral cleaner formulated to remove cement haze, mortar/efflorescence, hard water scale, atmospheric grime, and rust streaks from Mineralite (cementitious) plaster, concrete, brick, and stone. The blend of buffered organic and inorganic acids, plus wetting agents and a corrosion inhibitor, gives rapid soil breakdown with reduced fuming and better substrate safety compared to straight mineral acids.
- Chromate/nitrite free
- Low-fume vs plain HCl
- Designed for professional façade cleaning prior to coating or handover
Areas of Application of RXSOL Mineralite Masonry Wash
- External Mineralite or cementitious plaster walls
- Concrete, blocks, bricks, pavers, and most natural stones*
- Removal of: cement splashes, laitance, efflorescence, atmospheric dirt, rust stains from rebar bleed or fixtures
*Always perform a small patch test; avoid acid-sensitive stones (e.g., limestone/marble/travertine, polished granites)
Use caution / test first: colored renders, architectural finishes, natural stones
Not recommended: polished limestone/marble; galvanized or bare aluminum/zinc surfaces; glass and anodized finishes (mask beforehand)
Do not use if: Substrate is acid-sensitive (e.g., calcareous stones) or has hairline cracks exposing steel. Fresh plaster is
Equipments to use: Low-pressure chemical sprayer (acid-resistant), soft brushes, water supply for flooding rinse, wet-vac or controlled runoff capture if required by site EHS.
Key Features of RXSOL Mineralite Masonry Wash
- Works 3–5× faster than non-acidic cleaners on mineral deposits
- Inhibited to reduce attack on sound cementitious matrices and nearby metals
- Buffered to improve control and reduce pungent fumes
- Wetting/dispersing system reduces streaking and re-deposition
|
Appearance |
Clear colorless to light-yellow liquid |
|
Solubility in water |
Miscible |
|
pH |
Acidic |
A. Surface Preparation
- Pre-wet the façade thoroughly with clean water (saturate pores; avoid dry suction).
- Mask/meticulously protect metals, glass, painted/varnished surfaces, landscaping, and drains.
- Heavy efflorescence/rust/cement bloom: 1 + 1 (1 part product : 1 parts water)
- Normal deposits/soiling: 1 + 3 to 1 + 8
- Light maintenance wash: 1 + 10
- Always add product to water, not water to product. Use plastic containers.
- Apply from bottom-up using low-pressure chemical sprayer or soft acid-resistant brush.
- Allow 2–5 minutes dwell time. Do not let it dry.
- Agitate stubborn areas with a soft brush.
- Rinse copiously from top-down with fresh water until runoff is clear.
- Repeat if necessary (light second pass is common on heavy crusts).
Masonry Wall Wash Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Masonry Wall Wash Cleaner at a competitive price from us. We have ready stock of Masonry Wall Wash Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
Masonry Cleaner, Wall Wash Cleaner, Wall Mineral Cleaner
