Twitter icon
Facebook icon
Google icon
StumbleUpon icon
Del.icio.us icon
Digg icon
LinkedIn icon
MySpace icon
Newsvine icon
Reddit icon
Technorati icon
Yahoo! icon
e-mail icon

Valvocare Fuel Additive

SKU:
RXSOL-70-7006-025
Packing Sizes: 

Specifically intended to prevent damage of exhaust valve , formulated for treatment and reduction of corrosive deposits formed on exhaust valve seats and turbocharger components. Standard Stock available in 20, 25, 50, 210 Ltr packing in Mumbai, Visakhapatnam, Chennai- Ennore, Kolkata, Kandla - Gandhidham, Manglore, Fujairah - Dubai.

RXSOL-70-7006-025 is antivanaduim and protect system from SODIUM problem . It is specifically intended to prevent damage of exhaust valve , formulated for treatment and reduction of corrosive deposits formed on exhaust valve seats and turbocharger components.
COMMON NAME : VALV CARE

Product Application: 

For physically modifies fuel ash, raising the sinter melting points of the ash above the normal engine operating temperatures. Modified ash particles are solid, small and non-adhesive and are ejected with the exhaust gas steam.

Product Dose: 

Typical dose rates vary between 1 : 1000 and 1:5000 ( 1 Ltr / 1-5 MT ) depending on the nature and severity of the problem. For more detail prefer to technical bulletine.

Product Note: 
FUEL ADDITIVE Combustion Improver Catalyst is a flexible way to optimize the use of heavy fuel oils and exhibits the following main properties:
  • Significantly reduces the amount of soot and unburnt hydrocarbons (more than 50%) formed during the combustion of heavy fuel oils
  • Allows reducing the excess air used during the combustion process
  • Improves the flame homogeneity and allows to achieve a more stable yield of combustion
  • Reduces deposits on heat transfer surfaces and consequently allows to achieve a more efficient heat transfer in the convection zone
  • Therefore, reduction in fuel consumption is achieved.
Advantages of Fuel Additive
  • Reduces the unburnt solids by at least 50%
  • Decreases emission of Black smoke & Co. Gas
  • Reduces NOx by at least 30%
  • Satisfies environmental considerations
 
 
Combustion Improver Catalyst must be stored and handled at ambient temperatures not lower than minus 3'C. Carbon Steel, stainless steel, polyethylene, polypropylene or Teflon may be used for construction of storage.
 
The recommended blending method is either by direct injection in the fuel line by a dosing pump or by addition into the fuel storage tank or in the tanker before decantation of the fuel.
 
Combustion Catalyst-cum-Stability Additive:
 
High Performance Multifunctional additive to solve Combustion and Sludge formation problems in fuel oil. Asphaltene + O2 C + CO + CO2 + H2O.
 
Because of the partial combustion, CO and C are not burnt completely. This additive makes the Asphaltenes break down and helps the molecules to burn easily to give more energy. Normally this additive is dosed @ 500 to 750 ppm. Blending should be done in main tanks or storage tanks or tank trucks. This is a blend of performance enhancers, and its functions are given below:
 
Disintegrates the existing sludge molecules into fine Asphaltene molecules.
Avoids formation of sludge and keeps the Asphaltenes in well dispersed state.
Combustion Catalyst breaks down the Asphaltenes into smaller molecules, helps these broken molecules to burn by catalyzing the tough step of carbon monoxide formation, thus improving the heavy fuel oil to burn better, release more heat and as a result, saves fuel.
 
Benefits of Using Fuel Additive Combustion Catalyst:
  • Increases speed of combustion of oil.
  • Accelerates combustion of unburnt hydrocarbons
 
Mechanical:
  • Reduces excess air requirement
  • Reduces heat loss through heat transfer
  • Enhances heat transfer efficiency

Economic Benefits:

  • Effects 3-4% fuel savings, and enhance life of equipment
  • Sludge converts into good oil. Saves time, effort, and labour by avoiding tank cleaning
Environmental Benefits:
  • Reduces smoke, soot and particulate matter in flue gas
  • Reduces NOx by at least 30%; avoids sludge formation and hence sludge handling difficulties.
Combustion Catalyst-cum-Ash Modifier Additive:
 
Added to the function of combustion improver, it reduces deposits in the high temperature zones of the thermic fluid heater / boiler so as to make the thermic fluid heater or the boiler operate on the peak capacity all the times. Avoids corrosion of heat exchanger tubes and premature failure of high temperature surfaces.
Product Technical Specification: 

Remarks: 

Articles: 
Hashtags: 
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Valvocare Fuel Additive supplier in DUBAI, Fujairah, Sharjah, Ajman, Abudhabi, UAE, Ruwi Barka Gala Muscat Oman, Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Gandhidham, Nairobi, Kenya, Sudan Yemen, Canada

Alias: 
Industrial Area: 
Other Equivalent Brand: 

AMERGY XLS / Caretreat Combution, FOT C - 100, Diselite Valvecare, Eazy Ash Control, FOT-LOW SULPHUR, ADERCO 1050 Lubricity Improver, XMILE BIO ENZYME ADDITIVE, FUEL OIL CONDITIONER 25 Ltr

Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates

About Us

We are one of largest marine chemical manufacturing company in Asia. Our specialization in marine, oil field, shipping industry. Since 1995 our group team continiously developing our product to achieve best in quality and services. Specially in shipping industries we make our position on TOP among all supplier. All shipchandler and shipping company of UAE - Middle East are well known to us and DUBI CHEM Marine International have more then 1800 global regular client to achieve our monthly target more then 360 MT .   DUBI Chem Marine International have very strong distribution network as well in INDIA also to complete supply directly on ship vessel -  http://www.westindiachemical.com/ (Kandla,Mundra,Sikka) ,  http://marinechemical.in/ (Mumbai,JNPT,Goa,Manglore) , http://www.vizagchemical.com/ (Vizag-Visakhapatnam,Gangavaram) , http://ennoreindiachemical.com/ (Chennai,Ennore,Kochin) , http://eastindiachemicals.com/ ( Kolkata, Haldia, Paradip ) etc... For INDIA supply directly mail us on rxmarine@gmail.com or feel free to call us 0091-9821214367 ...
 

Latest Tweets

Follow Us

Twitter icon
Facebook icon
Google+ icon

ISO 9001 Certificate

STOCK Point : UAE, OMAN, KENYA, INDIA, CANADA

Call Us : +971 9 2242524 / 09 2242534
Support:+971 9 2235488

Email : dubichemical @ gmail.com ( Only for Customer )

Never use this mail for CV BIODATA, you will get BlackListed permanently
We have separate HR TEAM for Bio DATA and Selection of CV.
            
Business WhatsApp ::: +971 56 108 1115 

CHEMICAL DISTRIBUTOR IN UAE GULF MIDDLE EAST

Address : الحيل Plot no. 37A, block -L, Next to GULF Ready Mix Al Hayl Industrial Area - Fujairah - United Arab Emirates