.Air Cooler Cleaner:- manufacturer and supplier in India, Dubai, Middle East(UAE), Fujairah, Sharjah, Singapore, Greece, Kolkata, Meher Ali Road, Muchipara, G.T.Road ,Burdwan. Our group of company RX Marine International west India Chemical, East India Chemical, and Ennor India Chemical manufactured and supplies the Air Cooler Cleaner to various country all over world. We have our ready stock available at our various branches in India, Dubai, Middle east(UAE), Fujairah, Sharjah, Singapore, Greece AIR COOLER CLEANER is a very effective mixture of solvents, surfactants, strong emulsifiers and penetrating agents formulated to penetrate and remove mineral oils, grease and other deposits from air coolers and turbochargers in marine engines . AIR COOLER CLEANER is used in air coolers, turbochargers, and the scavenging system of marine engines, either when running or idle. The product is also used to remove carbonaceous residue from machinery parts.
• Formulated to remove oil, grease and carbon residues from air coolers, turbochargers and scavenging systems
• May be used for carbon deposits cleaning of machinery parts
• May be used for in-service cleaning
• Helps maintain air cooler efficiency to maximum levels
• No harmful effect to engines
• Reduces maintenance costs and saves time
Using a permanently installed or portable injection apparatus spray a solution of AIR COOLER CLEANER in water in the air trucking system, so that the solution jet flows in the opposite direction to the turbocharger forced air stream. Continue injection for 10-15 minutes and allow 15 minutes for the product to act. When injection is complete, inject an equal amount of water to rinse. For turbocharger air side and air cooler cleaning, use a 30-50% solution of AIR COOLER CLEANER in resh water depending on the amount of deposition. When cleaning turbocharger exhaust side, reduce the content of AIR COOLER CLEANER down to 10%.
Note: The cleaning frequency largely depends on the amount of air cooler fouling. At the early stages, it is recommended to repeat the cleaning procedure every 24 hours and slowly reduce the frequency of application. The dosage rate, however, should remain constant regardless of the application frequency.
The engine is stopped and the air cooler drain valves are opened. Using a pressure hand spray, AIR COOLER CLEANER is applied undiluted to the cooler coils. The product is allowed to penetrate for a minimum of one (1) hour and then, using a high pressure water jet, all loosened deposits are being removed. The process is repeated if necessary and the system is thoroughly rinsed prior to closing the drain valves. Soak parts in a bath of undiluted AIR COOLER CLEANER for as long as necessary (min. of 2 hours) so that deposits are loosened and can easily be removed with a high pressure water jet and wire brush. Rinse well with fresh water.
Benefits
• Fouling of air coolers is reduced thus heat transfer and engine efficiency is improved
• Fire hazards from the build up of grease and residues are minimised
• Down time and expense of periodic dismantling of the air handling system for cleaning is eliminated
• Scavenging efficiency is improved by the reduction of deposit build-up around scavenging ports
• Water displacing surfactants incorporated in the chemical form a mono molecular film throughout the air handling system, which protects the metals and reduces the adherence of airborne contaminants
We always give top most priority to our customers and thus endeavour to offer the lightest level of satisfaction to them.We always opt for quality of product what we manufacture rather than quantity. We provide customise packing as per our customer demands and specifications
FOR MORE DETAILS ABOUT PRODUCT PLEASE VISIT ON FOLLOWING LINK
VISIT OUR WEBSITE :-http://dubichem.com/product/antioxidant-liquid-gasoline
MAIL US ON :- dubichem@gmail.com
