Twitter icon
Facebook icon
Google icon
StumbleUpon icon
Del.icio.us icon
Digg icon
LinkedIn icon
MySpace icon
Newsvine icon
Reddit icon
Technorati icon
Yahoo! icon
e-mail icon

Seacleaner 210 Ltr

SKU:
RXSOL-20-2002-210
Available Packing Sizes: 

500 ml, 5 Ltr / 25 / 50 / 210 Ltrs Discount is not applicable for smaller packing.

Seacleaner is strong degreaser and tank cleaner for all types of petroleum and aromatic based compound. RXSOL brand seaclean differs from other as it contains Rice Bran based long chain emulsifer along with other emulsifer which is used in general common brand in market. Due to presence of long chain emulsifier petroleium derivativetives are not only quickly degreasing from surface but also easily mixed and dissolved into water, which results less hydrocarbon traces on tank surface.
RXSOL Seacleaner is premium quality product specially formulated for cleaning of oily greasy surface of tanks.  to emulsify all types of oils using hot or cold processes. Field area double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck.

Highly concentrated product only ½ to 1 litre of RXSOL-20-2002-210 required per tone of water, when ROCK and Roll tank cleaning method adopted. Refer below " Dose " block to view complete method.
 

Product Application: 

RXSOL seaclean is formulated for cleaning double bottom, deep and wing tanks used for petroleum fuel oils. Aromatic chain compound have special feature and its chain bonding in molecules are very strong, so its cleaning always required special type of cleaner. 

Our team is continiously working on daily problem faced by customer, and observed that after using of SEA Clean all oil base compound are emulsifed and cleaned out. But if tanks / vessel are required complete removal of hydrocarbon even traces, smell from tank surface then repetition of tank cleaning through RXSOL-16-1011-210 .

Product Dose: 

Directions for Use and Dose Rates: RXSOL-20-2002-210 is  specially formulated for cleaning double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck.

Soak Method: for heavy soil put parts into undiluted RXSOL-20-2002-210, for general soiling use a solution of 10-30% RXSOL-20-2002-210 in water. Parts should be soaked for at least 30 minutes before washing off with water.

Spraying Method: Use neat RXSOL-20-2002-210 over all soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., Scrubbing will assist the cleaning operation  for stubborn deposits.

Rock and Roll Method: Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.

1.First of all  heat the remaining oil in tanks .
2.By stripping constantly. flush the tank with sea water,
3.Close  all suction and discharge valves .
4.1stDose  Fill the tanks by ½ to 1 litre RXSOL-20-2002-210 per tone of water  through pipe or manhole, for 75-80% of capacity of tank to be cleaned.
5.Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this  temperature for 24 hours.
6.Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
7.Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
8.Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:
9.For completion add second dose of
RXSOL-20-2002-210, fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .
10.Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
11.To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely


 

Product Note: 

Pre-wash with Hot water ( 50 degrees C)  is helpful before cleaning with SEACLEAN. This trick will help to remove excess of oil contaminates and also hot water releasing bond between metal and oil contamination.  But never follow this step for crude oil, drying and semi-drying oils as these products can reverse cleaning effect with hot water. In this case, prewash with cold water should be applied to remove excess of oil from tank and metal surface area.

Highly concentrated product easily emulsify solvent and petroleum product.  This products are classified as a degreaser and tank cleaner.

Product Technical Specification: 

RXSOL-20-2002-210 is an extremely effective  liquid blend of  concentrated emulsifier with penetrating agents,mild abrasives and wetting agents which makes this an excellent  liquid scouring cleansers for cleaning and degreasing of double bottom,deep tanks etc which is used for fuel oils It can also be used for   BOILERS,MARINE DIESEL ENGINE COOLING WATER SYSTEM and for local cleaning and degreasing of engine rooms  on deck.

Remarks: 

Direct Injection Method for Tank cleaning through Seaclean :
Dose value of seaclean can varies depends up on contamination and deposition of oil on the surface area. For tank cleaning " direct Injection Method " also one of the popular method. In this method, neat SEACLEAN can be injected  directly from the drum through air-operated drum (barrel) pump. During this method this barrel pump can be connected to the pressure side of the automatic tank cleaning system line. Barrel Pump can be fixed at a predetermined rate 
as an injection rate of 0.1 0.2 liter SEACLEAN per 100 litres of tank wash water is sufficient. Cleaning time 2-6 hours. Finally wash and rinse the tank with water. 

 
Spraying Method : If specific area of tank is heavily contaminated Use neat seaclean overall soiled areas. Allow 10-20 minutes for reaction, then rinse with high pressure water hose., Scrubbing will assist the cleaning operation for stubborn deposits.

Direct Hand Spraying Method some time becomes necessary for cleaning of the heavily contaminated tank. On the other hand, we can also say that expert always selecting hand spray method before going to any other tank cleaning method to make there job easy. Expert shortlisting all tuff and heavily contaminated area and directly spraying neat Seaclean all over soiled areas. Then they are following another method like direct injection method, Recirculation method, Rock and roll method etc...

Recirculation Method for ship tank cleaning - 

1) First of all  heat the remaining oil in tanks .

2) By stripping constantly. flush the tank with sea water, 

3) Close  all suction and discharge valves .

4) Then make solution seaclean with water with percentage ratio of 2-6% SEACLEAN ( 2 Ltr to 6 Ltrs in 100 Ltr Water ) concentration value can be increase as per cleaning demand and contamination and condition of tank. Circulate cleaning solution via the automatic tank washing system pump and heater to the tank to be cleaned, wherefrom the solution is returned to the chemical solution tank via the stripping line. The same solution can be repeated for 2 - 3 tanks, then new cleaning solution required if same solution repeated for more then 2-3 tanks. Finally after recirculation the tanks should be rinsed thoroughly with sea water or fresh water depending on availability and requirements.

Rock and Roll Method at sea cleaning for double bottom tank:

Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.
1) First of all  heat the remaining oil in tanks .
2) By stripping constantly. flush the tank with sea water, 
3) Close  all suction and discharge valves .
4)1st Dose  Fill the tanks by ½ to 1 litre seaclean per tone of     water   through pipe or manhole , for 75-80% of capacity of tank to be cleaned.
5) Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this temperature for 24 hours.
6) Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
7) Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
8) Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:
9) For completion add second dose of Seaclean, fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .
10) Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
11) To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely.

Use Handgloves, Goggles and safety mask before using in Tank. Keep container tightly closed and away from direct heat, fire and sunlight.

Information: 

Dubi Chem Marine International is largest cleaning chemical manufacturer and supplier in Middle East / Uae. We have daily supply services for Sea Clean supply in Dubai, Sharjah, Abu Dhabi, Fujairah. We also covers full range of Industrial Chemical, Oil field Chemicals and Marine Chemicals. In UAE Dubi Chemi Marine International is only single company which have direct distribution in all indian coastal.  Our UAE based shipchandler and shipping agents are supplying various marine chemical in India by utilizing there direct Delivery Note for Ship Supply. 

Click here for small packing of Seaclean.

Supplier: 

Sea Clean supplier in Dubai, Fujairah, Sharjah, Abu Dhabi, Middle East / UAE. Dubi Chem Marine International managing free on board ship supply for a minimum quantities of 1000 Ltrs Seaclean. 

Distributor: 

Local brands are managing there supply by reducing surfactant content less then 30%. Our company have rich surfactant formulation which effects Benzene and aromatic compound easily disperible and watersoluble. For order quantites more then 1000 Ltrs of Seaclean we have special rates for our Gulf based customer. Your email querry will help us to provide you SEA CLEAN price / MSDS / Technical Bulletine... dubichem@gmail.com

Manufacturer: 

Seaclean of RXSOL brand is highly concentrated product only ½ to 1 litre of RXSOL-20-2002-210 required per tone of water. We have fully developed and standard formulation to maintain our Brand Name. Using Procedure of SEA CLEAN are common and can be modified as per base materials. 

Exporter: 

Seaclean Exporter for Kuwait, Turkey, Russia, Sri Lanks, Bangladesh. For making sea clean supply in KANDLA - MUNDRA - SIKKA / Jamnagar port ... Pl. click here.

Tank Cleaner
Articles: 
Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates

About Us

We are one of largest marine chemical manufacturing company in Asia. Our specialization in marine, oil field, shipping industry. Since 1995 our group team continiously developing our product to achieve best in quality and services. Specially in shipping industries we make our position on TOP among all supplier. All shipchandler and shipping company of UAE - Middle East are well known to us and DUBI CHEM Marine International have more then 1800 global regular client to achieve our monthly target more then 360 MT .   DUBI Chem Marine International have very strong distribution network as well in INDIA also to complete supply directly on ship vessel -  http://www.westindiachemical.com/ (Kandla,Mundra,Sikka) ,  http://marinechemical.in/ (Mumbai,JNPT,Goa,Manglore) , http://www.vizagchemical.com/ (Vizag-Visakhapatnam,Gangavaram) , http://ennoreindiachemical.com/ (Chennai,Ennore,Kochin) , http://eastindiachemicals.com/ ( Kolkata, Haldia, Paradip ) etc... For INDIA supply directly mail us on rxmarine@gmail.com or feel free to call us 0091-9322594669 ...
 

Latest Tweets

Follow Us

Twitter icon
Facebook icon
Google+ icon

ISO 9001 Certificate